Why is My PS4 Fan so Loud and How to Fix it?

If you’re a PlayStation 4 (PS4) owner, you may have noticed that the fan inside the console can get quite loud. While it’s normal for the fan to spin up when the system is under heavy load, constant loud fan noise can be frustrating and concerning. In this article, we will explore the reasons behind your PS4 fan’s loudness and provide solutions to fix it.

It is essential to remember that the PlayStation 4 (PS4) is not designed to operate silently. Due to the high demands of modern gaming graphics, the console may sometimes struggle, increasing fan noise. This is especially true when using the PS4 to play 4k games, which require a lot of processing power.

Why is the PS4 Fan so Loud?

The loud noise emanating from your PS4 can be attributed to one of three main reasons. The source of the problem could either be the cooling fan, the hard disk drive, or a damaged component causing vibrations.

The PS4 is Overheating

The PS4 is a powerful console that generates much heat during use. The fan inside the console is designed to keep the system cool by drawing in cool air and expelling hot air out of the system. If the console’s temperature rises too high, the fan will spin up to maximum speed to cool it down. This is usually the main reason why your PS4 fan is so loud.

Is the PS4 Fan is Dirty, or Dusty

Another reason your PS4 fan may be so loud is due to a buildup of dust and debris inside the console. Dust and debris can accumulate on the fan blades and other internal components, causing the fan to work harder and spin faster than it should. This can result in loud fan noise and decreased performance.

The PS4 Fan is Damaged

If your PS4 fan is making an unusual noise, it could be because the fan blades are damaged or worn out. This can cause the fan to spin off-balance, resulting in loud fan noise and reduced performance. If this is the case, you may need to replace the fan or have it repaired.

How to Fix the PS4 Fan Noise Issue

Clean the PS4 Fan

The first and easiest solution to fix your loud PS4 fan is to clean it. To do this, you’ll need to open up the console and remove any dust or debris that has accumulated inside. Next, you can use a can of compressed air or a soft brush to gently clean the fan blades and other internal components. This should reduce fan noise and improve performance.

Increase Airflow Around the PS4

Another solution to reduce PS4 fan noise is to increase airflow around the console. Ensure your PS4 is not enclosed in a tight space or surrounded by other electronics. This can limit the amount of cool air drawn into the system and increase the temperature inside the console.

Replace the PS4 Fan

If cleaning and improving airflow around the console doesn’t solve the problem, you may need to replace the PS4 fan. This can be done by purchasing a replacement fan online or taking your PS4 to a professional repair service. Unfortunately, replacing the fan can be tricky, so if you’re uncomfortable opening up your console, it’s best to leave it to the experts.

How to Fix the PS4 Cooling

When it comes to fixing the cooling system of your PS4, there are several steps you can take to ensure that the fan is working correctly and providing enough airflow to the console’s internal components.

Place Your PS4 in a Ventilated Area

If your PS4 is overheating, the fan will likely spin faster than usual to cool down the internal components, resulting in louder fan noise. To prevent this, ensure your PS4 is placed in a well-ventilated area where the fan can operate optimally. In addition, remove any objects that may obstruct the airflow around your PS4 and give it time to cool down.

Ensure Proper Airflow Inside the Console

Another cause of overheating in your PS4 is a blockage in the airflow inside the console. Dust and debris can accumulate on the fan blades or heat sink fins, restricting airflow and causing the fan to work harder and generate more noise.
To address this issue, use a can of compressed air to clean the inputs and vents of your PS4. This will help to remove any dust or debris that may be blocking the airflow inside the console. However, never use a vacuum to clean your PS4, as it can damage the components of the console.

Change the Room Temperature

The temperature of the room in which your PS4 is located can also affect its cooling system. If the air in the room is too hot, the PS4 fan will have to work harder to cool the internal components, resulting in louder fan noise. To solve this issue, try moving your PS4 to a cooler place in the room or near a window where there is a breeze.

Position Your PS4 Correctly

The position of your PS4 can also affect its cooling system. For example, if you have limited space and must place your console horizontally, try putting it vertically. This could eliminate some of the heat and noise from your PS4 and improve its cooling system.

Fixing the cooling system of your PS4 is crucial to ensure that it operates smoothly and quietly. By placing your PS4 in a well-ventilated area, ensuring proper airflow inside the console, changing the room temperature, and positioning your PS4 correctly, you can enjoy uninterrupted gaming sessions without the distraction of a loud fan.

Opening your PS4 Console

When your PS4 fan is dirty, it can produce louder than normal noises. If using a can of compressed air doesn’t solve the problem, then it might be necessary to open your PS4 console for a deep clean to remove dust buildup.

One common issue many Playstation PS4 owners face is the quality of the thermal paste around the processor. Often, the thermal paste is only applied to the sides and is spread thinly on the heat sink, which can impact the console’s performance.

If you’re experiencing loud fan noise due to dust buildup and suspect that the thermal paste could contribute, then opening your PS4 console can kill two birds with one stone. A deep clean will remove dust accumulation, while reapplying thermal paste can improve your console’s performance and reduce fan noise.

It’s important to note that opening your PS4 console can be a delicate process and should only be attempted if you’re comfortable doing so. If you need more clarification or feel confident in doing it yourself, it’s recommended that you seek assistance from a professional or send your console to Sony or a certified dealership for repair and maintenance.

If you’re experiencing loud fan noise and have tried using a can of compressed air, consider opening your PS4 console for a deep clean. This will help remove dust buildup and enable you to reapply thermal paste, improving your console’s performance and reducing fan noise. However, it’s essential to approach this task with caution and seek assistance if needed to avoid causing any damage to your console.

Note: It is important to note that proceeding with this step may void your PS4 warranty. If your console is still within the warranty period or is brand new, it is recommended that you send it to Sony or a certified dealership for repair or maintenance. This will ensure that your PS4 remains under warranty and that qualified professionals carry out any necessary repairs.

Open your Ps4 and Clean it Out

To effectively clean your PS4 console, you may need to open it up for a deep clean. To do so, you will require a unique T8 or T9 Torx security bit screw to remove the screws. If you still need to get one, it is recommended that you purchase one from Amazon or another reputable retailer.

Once you have the necessary screwdriver, you can remove all four screws at the back of your PS4 console. After you have removed the screws, you can open the device, providing access to the fan.

To clean the fan, you can use an alcohol cleaning wipe to remove any dust or debris from the fan’s dust cover. Alternatively, you can use a can of compressed air to spray away any dust buildup from the fan and other components of the PS4. It is vital to ensure that all components are clear of dust to ensure smoother and more efficient gaming operation.

Applying new Thermal paste to the PS4 CPU

The first step to applying new thermal paste to your PS4 CPU is to remove the heatsink from the CPU. Once you have done this, the best method for applying thermal paste is to use the ‘pea’ or ‘dot’ method. With this method, you squeeze a small amount of thermal paste onto the center of the PS4 CPU surface. Then, as you apply pressure to the heatsink, the paste will spread evenly.

It is important to note that the performance of your PS4’s cooling fan and the airflow management within the console’s case will also impact the effectiveness of the new thermal paste.

When selecting a thermal paste, there are a few options to consider. Noctua NT-H1 3.5g Pro-Grade Thermal Compound Paste, Thermal Grizzly Kryonaut Thermal Paste, and ARCTIC MX-4 Thermal Compound Paste are among the top-rated thermal pastes available on the market.

Applying the new thermal paste to your PS4 CPU and selecting a high-quality product can help improve your console’s performance and reduce fan noise.

FAQs

---

Latest Soundproofing Tips